PDA

View Full Version : Pantograph wipers



jim73vw
20-01-2008, 05:57 PM
Hi all,

Can anyone recomend a supplier of pantograph wipers?

I had a couple of suppliers in my favourites on the old pc, but it died :annoyed:

Anyone sourced some recently???

Cheers all,

Ben
20-01-2008, 09:36 PM
Hiya Jim

You could try truck breakers. Busses and Tractor units VOlVO.
All new trucks use new system to keep the wiper blades straight.
If I get a chance so see if they will fit the canopy I will let you now.


Ben

jimcub
20-01-2008, 10:03 PM
have a look at this thread
http://euro-nova.co.uk/forum/viewtopic.php?t=164

I found a toyota wiper that I could bolt onto the one that was on my Nova

letterman7
20-01-2008, 10:26 PM
Jim, do you need the motor or just the wiper arm? I've got about a dozen arms that I'll be selling off shortly. Let me know if that's all you need.

R

dorsetlad
21-01-2008, 12:26 AM
Jim , try " The Toolbox shop. com " click auto electrics, then windscreen wiper motors ..... wiper blades are on the same page... if memory serves me correct.... no P&P fees if the goods are over 8
Terry

jim73vw
05-02-2008, 06:18 PM
Have been trying the websites referred to and others, but confused about what the end fixing is called?!

I have a tapered spline fitting on my old arm, on the drive side, and a 6mm hole on the other that pushes onto the pin on the car.

Most sites I go to refer to either 12 or 16 DIN, or A12 DIN72783 fixings.

Double dutch to me I' afraid

Anyone able to shed some light on this??