PDA

View Full Version : Weber 32/36



MicksRedNova
22-02-2012, 03:38 PM
Hi all

I am trying to get hold of a Weber 32/36 to get my car up and running for this season. I have the manifold to match already and am watching eBlag closely. If you have one that's gathering dust please PM me with details.

Thanks.

MicksRedNova
30-03-2012, 11:50 AM
Got one :groupwave: just need to fit it and set it up - then it should be ready for Detling :crossfinger:

Mick

jim73vw
03-04-2012, 08:48 PM
Got one just need to fit it and set it up - then it should be ready for Detling

Mick

Good news Mick - once I had mine running right it worked a treat on Nena.

As I recall Mike and Elaine have one on Purple Passion too.

If you do need help in setting it up lots of the buggy club use one - always good advice over there http://partsemporium.co.uk/BUGGYCLUBUKF ... /index.php (http://partsemporium.co.uk/BUGGYCLUBUKFORUM/phpBB3/index.php)

See you at Detling

rabs
28-05-2012, 12:43 AM
I could not be arsed waiting and looking for a cheep one on the Bay so I went to Weber and got a new unit and manifold and (I hope) all the bits I will need to fit it.
I also have a remote vacuum operated servo for the brakes BUT! there is no hole in the manifold to attach it, so I will have to get the ‘Black & Decker’ out and make one … tap it and then fit the pipe work for the servo …. Problem is I am not sure exactly where to drill the hole and as it was damn expensive I really don’t want to be guessing where to fit it …. Has someone fitted one before and can they give me a few pointers on what not to do
Thanks
RABS