PDA

View Full Version : Oil pump rebuild



Nic
12-11-2013, 05:58 AM
Im putting the engine back together again and Im to the point of reassembling the oil pump. The instructions say to put the rubber o-ring type gasket on the oil pump. I see there is a ring groove cut into the body of the pump but I dont have a rubber o-ring and I dont see one on CIP1. Is there one or am I misreading the instructions.

Peter
12-11-2013, 12:07 PM
There isn't one, a gasket between pump and engine and one under the lid, no O ring.