Not sure if Repairite ltd is still going, judging by the dismal failure of the products I was supposed to demonstrate I would be surprised.
neoprene...
Hi Peter - that sounds like an interesting product, I will have to check it out. The method of application is exactly what I was considering for the...
I think tunnelled lights would work better without the headlight covers, as the refractive index must be very high at such a shallow angle. There are...
I was actually trying to be clever, the LEDs are dimmed using a NE555 timer with a CR feedback loop to change the pulse-width. Unfortunately I had to...
OK, after all the trials and tribulations encountered over the last 7 years, the Green Machine is finally back on the road. What's it like to drive,...
As Peter says, it's a Mk1, the rear light panel design is for an early Elam car. Large glass sunroof, just like mine had. Interestingly, my car also...
Although I have loads of room by comparison but do have a firewall, I find it easy to take the Alternator/shroud and fan off in one piece, as long as...
Gently in soft jaw vice. I tried it on a bit of 10mm strip and it was easy to get a nice curve with a bend, kinda 3D. The actual 15mm T section will...