Page 1 of 71 1231151 ... LastLast
Results 1 to 10 of 702

Thread: Peter's Eagle SS

  1. #1

    Peter's Eagle SS

    Are we sure this time?
    O.K.
    URL to the best Eagle in the world (one day, possible)
    http://ukhozi.page.tl
    Please pop in and check it out, I have posted a whole bunch of better pictures too.
    Any technical questions just e-mail me and please sign the guest book.
    Thanks, Peter
    The opinions expressed in my posts may not be made in a sound mind and should be taken in the spirit intended, Jack Daniels is fine.
    Some people see things as they are and ask why? I dream things that never were and ask, why not?” JFK

    http://ukhozi.page.tl

  2. #2
    Just a bit more done.
    Managed a couple of minuets in the 'shed' today and knocked up a new arm rest thingy from an old plastic box, a bit of 3mm alloy sheet from a road sign and a bit a scrap red leathercloth and some MDF.

    The opinions expressed in my posts may not be made in a sound mind and should be taken in the spirit intended, Jack Daniels is fine.
    Some people see things as they are and ask why? I dream things that never were and ask, why not?” JFK

    http://ukhozi.page.tl

  3. #3
    Senior Member
    Join Date
    Jul 2007
    Location
    Perth, Western Australia
    Posts
    356
    Peter,

    Your Eagle is impressive with lots a hard work and nice mod's. There has been some serious time spent.

    Kym

  4. #4
    good skills!
    That kind of quality finish on the interior makes all the difference and is really hard to achieve!

    very nice (jealous!)
    P
    Never be afraid to stand out from the crowd!

  5. #5
    Ah, just a few decades of experience and watching Discovery Channel a lot. (Overhaulin', American hot -rod, Biker build off, etc.)

    Spell checker rules 'bout time
    The opinions expressed in my posts may not be made in a sound mind and should be taken in the spirit intended, Jack Daniels is fine.
    Some people see things as they are and ask why? I dream things that never were and ask, why not?” JFK

    http://ukhozi.page.tl

  6. #6
    Done a bit more and after looking at a few other pages I have improved the page by splitting it up, it was far too long as one page.
    The opinions expressed in my posts may not be made in a sound mind and should be taken in the spirit intended, Jack Daniels is fine.
    Some people see things as they are and ask why? I dream things that never were and ask, why not?” JFK

    http://ukhozi.page.tl

  7. #7
    I did neglect to say a big thanks for the great comments guys, Kym and Paddy, so better late than never, thanks, much appreciated. Still slogging , slow but sure, new job has slowed things up a bit a working as a mechanic full time again I kinda lack enthusiasm for more spanner work in the evening or Sunday but I will get back to it, promise. Peter
    The opinions expressed in my posts may not be made in a sound mind and should be taken in the spirit intended, Jack Daniels is fine.
    Some people see things as they are and ask why? I dream things that never were and ask, why not?” JFK

    http://ukhozi.page.tl

  8. #8
    Tried the link for our american cousins aircooled bits there prices are reasonable given the weak dollar.
    Dual 34 ICT kit, dual port type 1. Stock engines 1300cc to 1915cc with stock heads.
    These kits come complete with the carb, manifold, air cleaner and hardware.


    £290 delivered
    http://jimsnova.page.tl/
    Club Nova / avante membership 031

  9. #9
    Finaly seeing the wood in the trees so to speak,

    final brake ready to fit,



    Just needs a little machining to make the axle bracket area parralel with the disc and on it goes at last.



    I found an old mouse mat which will be the seal around the pedal cylinders and a spring for the throttle pedal,
    (nicked from a box of buggy spares I got sent).
    This will fit between the pedal and bracket
    Think it needs a set of small pedal covers


    Centre consul finaly ready to take the 4" screen for rear view camera ,


    I have rotated the AV socket on the curcuit board 90 degrees as there is not enough room for side entry and then mount the whole lot in from the back of the consul.


    Fuel modual final fit. (filter, computer sensor (MG) pump, and just out of sight the pressure regulator (set at 3.5 psi)
    The opinions expressed in my posts may not be made in a sound mind and should be taken in the spirit intended, Jack Daniels is fine.
    Some people see things as they are and ask why? I dream things that never were and ask, why not?” JFK

    http://ukhozi.page.tl

  10. #10
    Senior Member bushboy's Avatar
    Join Date
    Jul 2007
    Location
    Grays Essex
    Posts
    2,118
    Peter nice to see some one making some progress.

    Wilwood calipers look the dogs and unless yu are making a luxuary cruiser forget the pedal pads, who's going to see them?

    Bushboy
    "Always do what you are afraid to do"
    "I can accept failure, but I can't accept not trying"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •