I am fitting disc brakes to my front axel could any one tell me do i need to fit a compensator in the brake line .the disc is 11 inch with a fag caliper.
I am fitting disc brakes to my front axel could any one tell me do i need to fit a compensator in the brake line .the disc is 11 inch with a fag caliper.
Nope, It will work fine as on a 1302/3
The opinions expressed in my posts may not be made in a sound mind and should be taken in the spirit intended, Jack Daniels is fine. Autism isn't something you get or can be 'cured of', it is the way we are wired, differently.
http://ukhozi.page.tl
Mine has discs fitted to the front. Nothing special needed.
Mick
Club Nova Member
MicksRedNova2 may take longer than the original!!
I fitted front disks to mine with Citreon Visa calipers. I also fitted rear disks with lancia delta calipers. I needed to fit a brake bias valve to mine because of the none standard configuration that meant that the front would lock up too fast.
20mm vented discs with Wilwood 4 pot calipers, now THAT is stopping power, Just don't stamp on the pedal or you will rip out the beam from the frame head.
The opinions expressed in my posts may not be made in a sound mind and should be taken in the spirit intended, Jack Daniels is fine. Autism isn't something you get or can be 'cured of', it is the way we are wired, differently.
http://ukhozi.page.tl