Page 98 of 98 FirstFirst ... 4888969798
Results 971 to 975 of 975

Thread: Phill's Nova Project finally begins

  1. #971
    ***Euro-Nova Supporter*** BlueNova's Avatar
    Join Date
    Apr 2015
    Location
    St Andrews, Scotland
    Posts
    1,887
    Quote Originally Posted by Phill View Post
    .... I would appreciate any thoughts as to what the issue is that's causing the rough running and knocking noise?
    That's great news Phill

    ... and you're taking the right approach by commiting to a full rebuild at a leisurely pace since your Nova's already on the road.

    As for the noise, it sounds more like a top end rattle (especially when the engine is reved a bit) rather than the heavier knocking sound of the bottom end. However, if it was the top end I'd expect the engine to be running rougher.

    It's difficult to make out from the video if it's smoke or condensation coming from the exhaust. Anyway, given that you're planning a full rebuild you should be able to find out what's wrong and put it right.

    Really looking forward to following your rebuild

    Alistair

  2. #972
    ***Euro-Nova Supporter***
    Join Date
    Jul 2012
    Location
    London
    Posts
    1,453
    Blog Entries
    1
    Can't help with the knocking noise but good to hear about the Type 4 lump

  3. #973
    Senior Member
    Join Date
    Jan 2020
    Location
    Upper Hartfield, E Sussex
    Posts
    197
    Hi Phil is that a hydrolic tappet version of that engine, it's difficult to diagnose from the video but could be a hydrolic tappet, doubt it'll be a thrust issue as the noise doesn't go when the revs increase
    Mike

  4. #974
    Doesn't sound too healthy! I remember my type4 sounding much smoother than the type1, and it was great until the early Bosch computer (it was the injection engine) decided it didn't like living in the nasty plastic Nova! Noise wise it sounds quite 'endy', though not quite deep enough for the big ends - I can see a dramatic investagative strip-down on the cards before too long! (My cam was quite worn when I got in there many years ago) - how easy are spares for type4s?
    Last edited by Alzax3; 23-02-2021 at 12:52 PM.
    It's a 52 year old car and everything works, just not always at the same time.......and it's probably about to get jealous!
    *Donate to Euro-Nova today!*

  5. #975
    Senior Member Phill's Avatar
    Join Date
    Jul 2007
    Location
    Livingston (Scotland)
    Posts
    1,547
    Not sure if this version of the engine has hydraulic tappets - it's a 72/73 engine? My own thoughts are that the sound is the same as you might hear if a spark plug was missing, so perhaps something as simple as a missing plug (though you would expect the seller to spot that) or a damaged valve. A simple compression test should give a good indication of where to look.


    I don't think it's likely to be bottom end as these engines have a reputation for durability in that area. So a top end re-build is hopefully all that would be required. Spares are available though more expensive and less ubiquitous than type 1 spares
    "The most beautiful kit car in the world - Motor"

    http://stores.lulu.com/rightsigns


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •