Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Wiring loom

  1. #11
    ***Euro-Nova Supporter***
    Join Date
    Jul 2012
    Location
    London
    Posts
    676
    Blog Entries
    1
    Quote Originally Posted by Dirk View Post
    If you are going to use any sort of crimp connectors make sure you have the correct ratchet crimp tool and do not solder the connectors. It might be a bit expensive but will last a life time and do a much better job.

    Dirk
    Hi Dirk, What is best practice on this?
    Care to post some links to the best tools for building a home-brew loom?
    There seems to be a lot of interest in this.

  2. #12
    Senior Member
    Join Date
    Mar 2009
    Location
    East Riding
    Posts
    1,106
    I'm not really sure what is best practice, but for me I will try and crimp wherever possible with the correct ratchet tool for the connector. I don't like soldered joints on connectors that move or vibrate (most connectors in a car) as they become brittle and any flexing will cause a fracture at some point. the only time I will solder on a car is joining two wires and then I tin both wires seperatley but don't twist them hold them together and fuse then cover with heat shrink. I try and avoid insulated terminals wherever possible (but sometimes you do need to use them) I would rather use uninsulated ones and buy boots it makes a much better connection it does mean you need another tool.

    Dirk

  3. #13
    ***Euro-Nova Supporter*** Spacenut's Avatar
    Join Date
    Jul 2007
    Location
    Hampshire, UK
    Posts
    5,033
    I would agree with Dirk - crimp provides a more reliable electrical connection in a high vibration environment. We use crimp connections on all of our spacecraft harness at work for the same reason (launch vibration).

    That hasn't stopped me using solder on the Cannon connectors though

    Lauren

    PS - I have a ratchet tool for insulated connectors and a crimp tool for non-insulated. If I was to choose just one it would be the non-insulated tool, as Dirk recommends. You can buy insulating boots separately.
    only Pythagoras can save me now!

  4. #14
    I intend to complete the wiring on my car during the Christmas holidays so have been on line and ordered up some of the parts I need. However, the highly recomended CBS module (https://www.carbuildersolutions.com/...-wiring-module) is currentlyl out of stock with no indication of when it will be back in (I emailed but so far no reply). My dilema is do I go down a different route and buy the individual fusebox and relays and attempt to wire it all up by myself, or wait for the CBS module to become available again in what I hope will make for an easier install? Problem is of course I may not get the part before the Christmas break and so miss the opportunity this will give me to spend some extended time working on the car. If I can't get the CBS module what other alternatives are there?
    "The most beautiful kit car in the world - Motor"

    http://stores.lulu.com/rightsigns


  5. #15
    Senior Member
    Join Date
    Mar 2009
    Location
    East Riding
    Posts
    1,106
    I've not seen anything else like the CBS unit, but I guess it depends on how deep you want to go with it? the CBS unit is simple and easy, but lacks some of the more refined things that we are used to with more modern day cars ( lights fused separately either side intermittent wash wipe) ect. Both my last Nova and the Avante use the fuse box from a Metro lots of extra fuses and relays for add-ons. But obviously lots more work. I do have modified schematics and wiring diagrams if you want to go down that route.

    Dirk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •