Been working on the headlights and the new interior side panels
Attachment 2996
Been working on the headlights and the new interior side panels
Attachment 2996
Nice fit and as usual, out of the ordinary.
The opinions expressed in my posts may not be made in a sound mind and should be taken in the spirit intended, Jack Daniels is fine. Autism isn't something you get or can be 'cured of', it is the way we are wired, differently.
http://ukhozi.page.tl
its hard to keep up with your interior side panels. At least I'm the proud owner of a mark 1 Brett side panel as its now unique as no one else will have one
I personally think your previous version was excellent as well.
Are you going to keep original headlight outlines or are they going to be blended into the body?
One philosophy that I try to hold to is, that if you have to build it make it your own design. Why go through the trouble of building something only to copy someones design. You can look at other designs to get inspired but don't make it exactly the same.
Yes you have #1 of #2(I have #2) and the molds are gone.
These new side panels address the issue of storage. The storage pocket is back plus there is a cup holder inside of the pocket so there is a place to put your drink. I'm also toying with the idea to have the arm rest cushion to be removable and have a small storage area under it. Maybe have a coin holder also enclosed under it.
Blended into the body. I just need to make sure everything works properly before I seal it up. If anything needs attention its easier to get to right now without that panel.
Once done all you'll see is the headlight cover. Everything else will be blended into the lines of the body
Some really nice work love what you have done with the side panel.
Dirk
Bucks for the headlight covers and interior side panels are done.
Headlight covers will be bonded into place and will not be removable.
Just need to wait for the temperature to warm up to make the parts now
P1080001.jpg
P1080002.jpg
P1080003.jpg
P1080004.jpg
P1080005.jpg
Very nice, some serious mods there... I like what you have done with the indicators, good work.
My Build Pics: https://www.dropbox.com/sh/t4vj51udn...Beo_60GFa?dl=0
Looking good as always. Actually those slim line indicators do look like they have lots of possibilities to where they can be placed. What are they off of?
Very, very nice work 👍