Been working on this a little at a time but now that the hood/Bonnet is getting closer to being finished work on this has picked up.
This is nothing more than the canopy lifting hinge reversed. the long arm is in the front and the short arm is in the back now.
It was just getting the length of the arms figured out and the location of the pivot points that took some time.
This hinge lifts the Bonnet/Hood up level and moving it forward to clear the open canopy and once clear of the canopy it flips the bonnet/hood open.
Thats the plan. Early testing showed that it would work. Mounting brackets will be changed to fit the car
P6160001.jpg
P6160002.jpg
P6160003.jpg
P6160004.jpg
P6160005.jpg